Radio / Amplifier

The crossfire is fitted with a Becker radio, very similar to a Becker Monza. The speakers on the non-Base models are powered by an additional Infinity Amplifier.

Amplifier

Wiring

"Power Amplifier A"

1 Blue Right Door Speaker -	2 Blue / Brown Left Door Speaker +	3 Blue / Brown Left Door Speaker +	-	-	4 Brown Ground	5 Blue / Dark Green Enable signal to Amplifier
6 Yellow / Violet Left Rear Speaker +	7 Yellow Right Rear Speaker -	8 Blue Right Door Speaker -	9 Yellow / Violet Left Rear Speaker +	10 Yellow Right Rear Speaker -	11 Brown Ground	-

"Power Amplifier B"

1 Red / Yellow Fused B(+)	2 Red / Yellow Power Top status signal (Roadster only)	3 Dark Green / White Wheel Speed sensor output	4 Black / Red Left Rear Speaker Ground	-	-	5 Blue / Red Amplified Right Rear Speaker +	6 Pink Amplified Left Rear Speaker +	7 Black / Pink Amplified Right Door Speaker +	8 Black / Blue Amplified Left Door Speaker +
9 Red / Yellow Fused B(+)	10 -	11 -	12 Blue Left Rear Speaker Supply Voltage	13 Red / Yellow Right Rear Speaker Ground	14 Violet Right Rear Speaker Supply Voltage	15 Black / Yellow Amplified Right Rear Speaker -	16 Dark Green Amplified Left Rear Speaker -	17 Brown / Yellow Amplified Right Door Speaker -	18 Brown / Dark Green Amplified Left Door Speaker -