ECU

The Chrysler Crossfire has been equipped with the Bosch ME 2.8 ECU, which is used by the Mercedes R170 series cars, such as the SLK 320.

Programming

It is programmable over the OBD2 port, software such as Eurocharged EuroFlash tool. Other options is to open up the ECU and flash the EPROM directly. The flashing over OBD2 is a feature that is also utilized by the Mercedes STAR Diagnostics software, for updating the ECU.

Featureset

The ECU is mainly the controller of the motor, such as managing the air-to-fuel ratios and ignition timing. Modifications on this software can include the following:

Modification	Models	Description	Known tuners for the ECU
Pops and bangs	SRT-6, N/A	Changes timings on ignition to combust 'too late', causing the explosion to be partially in the exhaust. This is oftentimes programmed for when you decrease throttle.	Eurocharged
Increase neutral/park rev limit	SRT-6, N/A	Crossfires lock the RPM of the engine, while not in drive/gear, to 4000 RPM. This limit can be increased in the software.	?
Supercharger pulley modification	SRT-6	A different Supercharger pulley requires a different air-to-fuel ratio as the compressor will suck in more air. Additionally, it will also turn on faster because of the higher RPM.	Eurocharged
Different air intakes	SRT-6, N/A	The stock airbox of the Crossfire on both SRT-6 and N/A are smaller than their bigger cousins, the C320 and the SL55. Giving the car more air helps already, but a tune would make better use of this change.	Eurocharged
Removal of idler pulley	SRT-6	Removing the idler pulley changes the RPM of the supercharger.	Eurocharged

TODO

• Add pinout
• Add product codes of the N/A and SRT versions
• Add links to ECU
• Add featureset of ME 2.8