Difference between revisions of "Distronic"

From Crossfires.net wiki
Jump to navigation Jump to search
Line 105: Line 105:
 
====Initialization====
 
====Initialization====
 
Bootup phase is about 30 seconds. The device needs to detect some particular frame in order to not deem itself faulty.
 
Bootup phase is about 30 seconds. The device needs to detect some particular frame in order to not deem itself faulty.
 +
 +
==== Communication ====
 +
N47-5 (ESP, BAS control unit):
 +
 +
'''Note: W209/215/220 have a different interface compared to W211/219/230'''
 +
 +
* DTR controls engine and braking torque interface of ESP unit.
 +
* ESP/BAS sends:
 +
** Left front, right front, left rear, right rear wheel speeds
 +
** Steering angle (0 to 720 degrees)
 +
** Steering angle sign (right/left)
 +
* ESP/BAS receives from DTR:
 +
** Distronic error
 +
** Target evaluation (distance to it, relative speed, angle, radar lobe orientation, strength of the reflected radar beams)
 +
*
 +
 +
<br />

Revision as of 14:33, 6 December 2022

Radar

Name: ART2 B (aka Distronic Plus), "ART210", DTR2

Mercedes part ID: A89 (A89b1 DTR Radar Sensor and A89n1 DTR Control Module integrated in single unit)

This device has only a single connector. This connector is close to VEMO V99-83-0013, but you have to cut the plastic to fit. On older models (ART1), a secondary unit is required and is has a coaxial cable running to it. The plug this coaxial cable is connected to, is used as a venting hole on ART2 / DTR2. Its a much more complex system, check W220 wiki for more information.

Connector 1:

  • A2105403681 "6-PIN MQS;B29"
  • Replacement/self built: VEMO V99-83-0013
  • Pinout:
    1. 0.5 RedGreen: Circuit 87 (POWER)
    2. Not Connected
    3. Not Connected
    4. 0.5 GreenWhite: CAN-C High
    5. 0.5 Green: CAN-C Low
    6. 0.75 Brown: GROUND

Fitment:

  • W219 (CLS)
  • W211 (E), mounted with reflector (might need reflector to work properly?)
  • W230 (SL)

P/N (PLEASE CHECK FOR MISSING COAXIAL PLUG, OTHERWISE ITS ART1):

P/N ART EPC Note
W219 CLS and W230 SL
A0005408817 1 W230 ONLY, until 28/05/2004
A2305400917 W219: until 31/10/2007, W230: from 30/07/2004, replaced by 1417
A2305401417 W219: until 31/10/2007, W230: from 30/07/2004, replaced by 1717
A2305401717 W219: until 31/10/2007, W230: from 30/07/2004, replaced by 1817
A2305401817 W219: until 31/10/2007, W230: from 30/07/2004
A2305400062 W219: 31/10/2007 and up, W230: from 30/07/2004, replaced by 0162
A2305400162 2 W219: 31/10/2007 and up, W230: from 30/07/2004
W211 E (Mounting with reflector)
A2115400617 1
A2115401417 2


Compatibility:

- R170 has no ZGW/CGW

- No mounting frame

- No K-Line, wire directly onto CAN

Fuse: 7.5A

CAN Opcodes
CAN ID Description
0x0254 A1 - Main status
0x025C A2 - Object 1 info
0x0260 A3 - Object 2 info
0x0264 A4 - Object 3 info
0x0268 A5 - Object 4 info

Distronic documentation on W220 wiki https://w220.wiki/Distronic

Initialization

Bootup phase is about 30 seconds. The device needs to detect some particular frame in order to not deem itself faulty.

Communication

N47-5 (ESP, BAS control unit):

Note: W209/215/220 have a different interface compared to W211/219/230

  • DTR controls engine and braking torque interface of ESP unit.
  • ESP/BAS sends:
    • Left front, right front, left rear, right rear wheel speeds
    • Steering angle (0 to 720 degrees)
    • Steering angle sign (right/left)
  • ESP/BAS receives from DTR:
    • Distronic error
    • Target evaluation (distance to it, relative speed, angle, radar lobe orientation, strength of the reflected radar beams)