Difference between revisions of "Fascia"
Jump to navigation
Jump to search
Line 7: | Line 7: | ||
</gallery> | </gallery> | ||
− | ==== Removal of Front Fascia ==== | + | ====Removal of Front Fascia==== |
− | === Rear Fascia === | + | ===Rear Fascia=== |
− | ==== Removal of Rear Fascia ==== | + | ====Removal of Rear Fascia==== |
The removal of the rear fascia (bumper) is rather easy. There are 15 bolts/screws to remove, explained below. | The removal of the rear fascia (bumper) is rather easy. There are 15 bolts/screws to remove, explained below. | ||
− | # Remove the rear fascia assembly retaining screws (1, 2, and 3). [[File:Rear Fascia Removal part 1.png|frameless]] | + | #Remove the rear fascia assembly retaining screws (1, 2, and 3). [[File:Rear Fascia Removal part 1.png|frameless]] |
− | # Raise and support the vehicle. | + | #Raise and support the vehicle. |
− | # Remove the right and left lower fascia trim retaining screws (1). | + | #Remove the right and left lower fascia trim retaining screws (1). [[File:Rear Fascia Removal part 2.png|frameless]] |
− | # Remove the rear fascia from the vehicle. | + | #Remove the rear fascia from the vehicle. '''Watch out for the side markers with lights. They should be removed before the fascia is removed.''' |
Revision as of 11:09, 8 September 2021
Front Fascia
The SRT-6 has a different fascia compared to the regular model. It has a scoop in the lip for the intercooler radiator. Additionally, there's holes in the bottom plastic covers to provide additional airflow through the radiators.
Removal of Front Fascia
Rear Fascia
Removal of Rear Fascia
The removal of the rear fascia (bumper) is rather easy. There are 15 bolts/screws to remove, explained below.