Difference between revisions of "Fascia"
Jump to navigation
Jump to search
| Line 2: | Line 2: | ||
The SRT-6 has a different fascia compared to the regular model. It has a scoop in the lip for the intercooler radiator. Additionally, there's holes in the bottom plastic covers to provide additional airflow through the radiators. | The SRT-6 has a different fascia compared to the regular model. It has a scoop in the lip for the intercooler radiator. Additionally, there's holes in the bottom plastic covers to provide additional airflow through the radiators. | ||
| − | <br /><gallery mode="packed"> | + | <br /><gallery mode="packed" heights="120"> |
File:2004 crossfire roadster.jpg|Regular front | File:2004 crossfire roadster.jpg|Regular front | ||
File:SRT-6 Roadster front.png|SRT-6 front | File:SRT-6 Roadster front.png|SRT-6 front | ||
| − | </gallery> | + | </gallery> |
| − | + | ||
| + | ==== Removal of Front Fascia ==== | ||
| + | |||
| + | |||
| + | === Rear Fascia === | ||
| + | |||
| + | ==== Removal of Rear Fascia ==== | ||
| + | The removal of the rear fascia (bumper) is rather easy. There are 15 bolts/screws to remove, explained below. | ||
| + | |||
| + | # Remove the rear fascia assembly retaining screws (1, 2, and 3). [[File:Rear Fascia Removal part 1.png|frameless]] | ||
| + | # Raise and support the vehicle. | ||
| + | # Remove the right and left lower fascia trim retaining screws (1). [[File:Rear Fascia Removal part 2.png|frameless]] | ||
| + | # Remove the rear fascia from the vehicle. | ||
Revision as of 11:07, 8 September 2021
Front Fascia
The SRT-6 has a different fascia compared to the regular model. It has a scoop in the lip for the intercooler radiator. Additionally, there's holes in the bottom plastic covers to provide additional airflow through the radiators.
Regular front
SRT-6 front
Removal of Front Fascia
Rear Fascia
Removal of Rear Fascia
The removal of the rear fascia (bumper) is rather easy. There are 15 bolts/screws to remove, explained below.
- Remove the rear fascia assembly retaining screws (1, 2, and 3).
- Raise and support the vehicle.
- Remove the right and left lower fascia trim retaining screws (1).
- Remove the rear fascia from the vehicle.
